CHARGER + CABLE
EXAKT ALLEN KEY
19MM CONE WRENCH KEY
Additional items included with bundle
PC8 POWER CONTROL
CHARGER + CABLE
HEART RATE BELT
The EXAKT PowerMeter is the result of close collaboration between two leaders: LOOK and SRM.
All electronic components, which are hand-assembled, are integrated into the body of the pedal, precisely where the force is applied, to ensure accuracy and reliability identical to that of an SRM PowerMeter.
The LOOK carbon pedal body and the stainless steel support surface ensure optimum power transfer for ultra-light weight.
The EXAKT allows you to measure every detail of your performance – power, cadence, force analysis, right-left balance, as well as the efficiency of your pedalling, the standardised power, the training indices … to perfect your training routines, allow you to discover your limits and improve yourself constantly.
Equipped with Bluetooth Low Energy and ANT +, the EXAKT sensor allows you to analyse and share your data with your smartphone or meter.
|799 €||1399 €||2179 €|
|POWER MEASUREMENT||Right||Right / Left||Right / Left|
|POWER||Right x 2||Right + Left||Right + Left|
|TORQUE ANALYSIS||Right||Right / Left||Right / Left|
|PEDAL SMOOTHNESS||Right||Right / Left||Right / Left|
|BLUETOOTH / ANT+|
|GUARANTEE||2 years||2 years||2 years|
|CONTACT SURFACE||400 mm²||400 mm²||400 mm²|
|CONTACT WIDTH||64 mm||64 mm||64 mm|
|PEDAL STACK HEIGHT (MM)||11.9||11.9||11.9|
|PEDAL + CLEAT STACK HEIGHT (MM)||18.2||18.2||18.2|
|WEIGHT: PAIR + CLEATS||376g||376g||376g|
|RETENTION LEVEL||9 TO 18||9 TO 18||9 TO 18|
|FLOAT||0 ° / 4,5 ° / 9 °||0 ° / 4,5 ° / 9 °||0 ° / 4,5 ° / 9 °|
The EXAKT PowerMeter pedal are compatible with all the market cranksets, since they can accommodate a standard pedal (9/16 X 20 mm thread)
The EXAKT pedals are compatible with every head unit communicating in Bluetooth Low Energy or ANT +.
Refer to the « quick start » procedure
Exakt PowerMeter pedals are compatible with the two LOOK KEO cleat standard version: KEO GRIP and KEO CLEAT. 3 float options are available 0° / 4.5° / 9°
When using the EXAKT PowerMeter on your bike, the pedals should be oriented to measure the tangential force you apply to the pedals. To help you position your pedals, it is recommended to use the EXAKT application that allows you to check the perfect orientation. While exerting a central pressure on the pedal body, adjust the orientation of the pedal until you are in the center of the gauge.
The installation procedure of the EXAKT Single version is identical to that of the EXAKT Dual version. The EXAKT Dual version is equipped with two instrumented axes – which allows to give the differentiated power between the right and left leg – it is therefore necessary to repeat twice the installation procedure – including the orientation of the pedal angle – for each of the two pedals.
When the pedal turns on by spinning the pedal body the LED will flash once for the first ten revolutions to indicate cadence and that the pedal is working correctly. If the LED does not flash check and if no dirt inside the hex pocket is blocking the LED and if the pedal is fully charged.
If a Bluetooth connection is established, the LED flashes repeatedly for 1-2 seconds. This indicator helps to see which pedals are getting connected and if the connection was successful.
The SRM – LOOK team regularly develops software updates to enhance your EXAKT experience. Updating your pedals allows you to benefit from the latest developments available. To do this, use the EXAKT app and connect your pedals with Bluetooth. As soon as your pedals are paired with the application you can start the update in the associated tab.
In the case where one of the pedals is not detected by the application, check the following points:
– Do you awaken your pedals to get them out of their standby mode?
– Is your smartphone Bluetooth mode switch on?
The EXAKT PowerMeter pedals have an autonomy of 100H. A first signal indicates a low battery level when there is only 20% left, then a second message indicates a critical battery level at 10%.
You can then charge your pedals, without disassembling them, thanks to the supplied magnetic charger.
The full charge takes about 3 hours.